อย่าลืมใช้คะแนนเว็บไซต์ที่สะสมไว้นะคะ คะแนนจะหมดอายุการใช้งานแล้ว

Home

Equipment

Flatbed Printer and Supplies

UV Printers

เครื่องพิมพ์ UV Polar 1.8 ม. พร้อมหัวพิมพ์ XP600/i3200---1.8m Polar UV Printer with 1 XP600/i3200 Printhead

Item #: SIT-POLAR-UV1850A-2

10 available

เครื่องพิมพ์ UV Polar 1.8 ม. พร้อมหัวพิมพ์ XP600/i3200---1.8m Polar UV Printer with 1 XP600/i3200 PrintheadI3200

Name: เครื่องพิมพ์ UV Polar 1.8 ม. พร้อมหัวพิมพ์ XP600/i3200---1.8m Polar UV Printer with 1 XP600/i3200 Printhead
SKU: SIT-POLAR-UV1850A
Price: 187250.00 THB
Availability: InStock

Unit cost

THB 187,250.00

/set

Wholesale discounts

Quantity

Discount

Price per unit

THB 187,250.00

Options

กรุณาเลือกประเภท กรุณาเลือกประเภท

Total Cost

THB 187,250.00

Amount

/set

Product Details

Description

/i3200

1.8m Polar UV Printer with 1 XP600/i3200 Printhead

Item Model		SIT-POLAR-UV1850A
1800mm
	XP600	i3200
720*720dpi(4pass)	14m²/H	17m²/H
720*1080dpi(6pass)	10m²/H	13m²/H
720*1440dpi(8pass)	7m²/H	10m²/H
75KG
UNEQUIPPED
MaintopV5.3,Photoprint,Seeget,Torpaz,Wasatch,Onyx
AC 110V±10%,AC220V±10%,50/60±1Hz
Temperature:20°C~35°C;Humidity:35%RH~65%RH
600W
L2837mmW455mmH1300mm
L2870mmW820mmH500mm
125KG
165KG

Install the tripod:

Component Names:
1.Main Body
2.Paper Feeding System
3.Dryer
4.Iron Legs
5.Crossbeam
6.Support Fixing Plate
7.Leg Frame
8.Paper Collecting System

Leg Frame Installation:
1. Install the left and right base feet at the bottom ends of the left and right iron legs, and secure them using 8 inner hex bolts (M5×10). Attach the casters with brakes to the left and right base feet using 16 inner hex bolts (M5×10).
Note: Tighten in the direction of the arrow, as shown in the diagram.

2. Install the tie rods and crossbeam between them and secure with 22 inner hex bolts (M5×10), as shown in the diagram.

3. Fix the support fixing plate to the left and right iron legs and the left and right base feet using 6 inner hex bolts (M5×10).

Then, secure both ends of the support fixing plate using 4 inner hex bolts (M6×25).

Place the assembled paper collection motor module and the paper collecting module onto the aluminum tube.

Then secure them using 2 straight-knurled handles (M5×25) to the left and right support parts, as shown in the diagram.

4. Attach the fan support components to the left and right iron legs using 8 inner hex bolts (M5×10).

Then fix the assembled dryer onto the support using 8 inner hex bolts (M4×10), as shown in the diagram.

5. Fix the support fixing plate to the left and right iron legs and the base feet using 6 inner hex bolts (M5×10).

Then secure both ends of the support fixing plate using 4 inner hex bolts (M6×25).

Place the assembled paper feeding module onto the aluminum tube.

Then secure it using 2 straight-knurled handles (M5×25) to the left and right support parts, as shown in the diagram.

6. After completing the steps above, mount the main body onto the leg frame. Align the circular holes and secure using 4 inner hex bolts (M5×10) (tighten in the direction shown by the arrow), as shown in the diagram.

For all the outdoor advertising prints on light box,bill board,high way,vehicle,buildings.