
Attention:
The new heating tubes have oil,the oil burning comes with smoke and burnin smell.It is normal!!! After the oil burning out ,the burning and smoking will disappear!
1600W Flash Dryer Silkscreen T-shirt Screen Printing Curing
Description:
1. After well installed, connect the power supply.
2. Turn on the switch and then it will work automatically.
3. Put the probe of the thermometer on the drying table, heat for some time (20 minutes in reference), and then check the actual temp. If the temp is too low or too high, just risen or lower the height of the drying box.about the smoke is normal after 30 minutes no more smoke.
Specification:
Voltage: 110V/220V
Drying Size:40*40cm(16"*16")
Power: 1600W
Application:
Flash dryer gives you a full larger curing capacity as well as a possible quicker flash time between colors. It can easily cure ink for silkscreen printing, can be used to flash dry your prints, and process the final curing of your garments. The flash dryer base is compact, and will not tip over if bumped. Stop curing shirts with a heat gun or an oven get this flash dryer and start drying your products the right way.
Note: Notice the fusing fuse in a long time continuous period, rest for cool, and check it regularly. Reserve properly, for electrical components is attractive to dust. Clean it's platform regularly before use and after.


Installation:

Package:
Package Size: 75*44*25 cm(30*17*10inch)
Net Weight: 17 KG(37.5lb)
Gross Weight: 20.0 KG(40lb)
