Features:
- The odor of this product is less, and it is non-toxic basically and easy to use;
- This product is not controlled by the temperature and solidified for 60 minutes by UV light at 10-55℃.
- This product can be resistant to the low temperature of -30℃and to high temperature of 100℃, and it has good light permeability, anti-yellowing and cracking resistance performance.
Advantages:
- The right side of this product is same smooth as the back side after it is solidified, which has good translucency.
- This product may be chronically stored at the temperature of 50℃ for more than six months.
- Either stainless steel or aluminum metal may be stuck with this product.
- The curing time of this product is 60 minutes and it has high efficiency.
- This product can also be solidified without lighting and wind.
|
Appearance
|
Viscosity cps
|
Curing condition
|
Shore D Hardness
|
Heat resistance
temperature
|
g/cm³ Density g/cm³
|
|
Milky white
|
5000~20000 |
UV illumination
60 minutes
|
75 |
﹣30 ~ 100 |
1.03 |
Proportion of color paste:
| 1.5% |
1.5% |
2% |
1.5% |
- |
| 90 |
120 |
60 |
60 |
60 |
Note: One point should be made than white air hole when the back air hole of the super-character with other color is made.
Basic manufacturing procedure:
Make character model―Painting―Installing lamp―Fill glue―Demoulding ―Inspection ― Deliver
Use of metal sideband:
The single-component glue may be used for all the sectional materials: including aluminum side band, stainless steel side band and fiber character model.
Description and storage of this product:
The single-component liquid acrylic glue shall be kept in dark place and stored below 30 ℃.