อย่าลืมใช้คะแนนเว็บไซต์ที่สะสมไว้นะคะ คะแนนจะหมดอายุการใช้งานแล้ว
Unit cost
THB 10,501.00
/bottle
Wholesale discounts
Quantity
Discount
Price per unit
1+
0%
THB 10,501.00
Total Cost
THB 10,501.00
Amount
/bottle
1
835AB Resin Character Glue for Super Character Curing Platform XK3000/ XK1215
Product Features:
This product is environment friendly anti-yellowing epoxy resin glue, which has a low viscosity and good leveling property and antifoam performance and which may be solidified under the normal temperature and medium temperature, whose curing speed is proper. This product does not absorb the moisture and is not whitened under the low temperature. In addition, the surface of this product is flat and smooth, with the good light permeability, strong adhesive force, corrosion resistance, ageing resistance, cold and thermal shock resistance, oil repellency and dust prevention performance.
Advantages of Resin Character Glue
1.This product is manufactured by the imported raw materials, which has very good anti-yellowing performance.
2.The appearance of this product is colorless and transparent and it has a high transparency and good glossiness after solidifying.
3.The surface of this product is smooth, without water ripples.
4.The product has very high hardness on ebonite and its hardness may be more than 80 SHORE after it is solidified.
5.All products have been tested and certified by SGS and ROHS certifications.
6.This product may automatically eliminate the foams and leveled, easy to use.
7.This product does not contain pungent smell, and it is environmentally safe.
8.There are abundant product categories, including hard glue, soft glue, quick-drying glue, slow-drying glue, indoor dedicated glue and dedicated glue for big characters.
Parameters:
| 835A | 835B |
| 3：1 | |
| 1.05±0.2 | 0.92±0.2 |
| 1350-1450 | 50-60 |
| 25℃×100g×30-40 minutes | |
| 25℃×6-8 hours or 60℃×1.5 hours | |
Features after Solidification:
Hardness (Shore D): 75-83
Water absorption (25℃，%/24h): ＜0.1
Compressive strength (Mpa): ≥20
Bending strength (Mpa): ≥1.5
Tensile strength (Mpa): ≥1.3
Elongation (%): /
Cure shrinkage rate (%): ＜0.5