อย่าลืมใช้คะแนนเว็บไซต์ที่สะสมไว้นะคะ คะแนนจะหมดอายุการใช้งานแล้ว
Unit cost
THB 1,905.00
/set
Wholesale discounts
Quantity
Discount
Price per unit
1
0%
THB 1,905.00
2-10
5%
THB 1,810.00
11+
8%
THB 1,753.00
Total Cost
THB 1,905.00
Amount
/set
1
Description:
This manual eyelet punch grommet machine is smart which is very easy to carry and convenient for shipping. The eyelet punch tool can exchange different die sets and all the 3 die sets are included (3 different sizes of die set meet customers different requirements).
Feature:
• Smart and convenient.
• Special design, hand force greatly reduced, soft grip.
• Free of special maintenance, easy to operate, supper appearance.
• Interchangeable Dies (#4, #5, #6) to meet different needs.
• Accommodating more material.
• Allowing Grommets to be set further into the material, not just along the edge.
• Can be mounted to a tabletop or stand alone.
| 1.Main Shaft | 6. Handle Fixed Screw |
| 2.Base Plate Hole | 7.Top Screw |
| 3.Base Plate | 8.Upper Die Set |
| 4.Handle | 9. Down Die Set |
| 5. Rubber Sleeve | 10.Allen Key |
Available Grommet Sizes (inner diameter, outer diameter, height)
#4(10mm, 19mm, 6mm)
#5(12mm, 22mm, 7mm)
#6(14mm, 23mm, 7mm)
|
Heavy duty, it’s available for punching more bigger and thicker banners. |
Smart and lighter, it’s available for smaller banner punching and for small amount of eyelet punching. |
|
3 Die sets interchangeable for customers’ different needs. |
Only one size of die set which can not change other size die set. |
|
Longer handle, that is more powerful and power saving. |
One hand can hold and press but for thinner and smaller materials. |
Warm Tips:
Avoid putting grommet where sewing string or other obstructions are located. Grommet may not set completely in these areas.
On foam boards, or boards alike, set the top screw to limit the handle from pressing all the way down. This will prevent crushing of the material (foam board). To set the screw you have to unscrew little by and test it each time until you are satisfied with the grommet setting.
Step 1: Place the washer on the bottom die.
Step 2: Place the grommet on top of the bottom die.
Step 3: Place the material on the bottom die.
Step 4: Depress the handle lightly until the top die is touching the washer.
Step 5: Holding the handle at that level, align the material into position to set the grommet.
This practical die-changeable manual grommet machine is very essential equipment for punching flex banner, mesh, ,signs, awnings, posters,digital printing etc.
