อย่าลืมใช้คะแนนเว็บไซต์ที่สะสมไว้นะคะ คะแนนจะหมดอายุการใช้งานแล้ว
Unit cost
THB 74,793.00
/set
Wholesale discounts
Quantity
Discount
Price per unit
1+
0%
THB 74,793.00
Options
กรุณาเลือกประเภท กรุณาเลือกประเภท
Total Cost
THB 74,793.00
Amount
/set
1
| Printhead | XP600 |
DX7 |
DX5 |
i1600A1/E1 |
i3200A1/E1 |
|
| Printspeed | 3 pass | - | - | - | 15m²/h | 30m²/h |
| 4 pass | 10m²/h | 12m²/h | 12m²/h | 10m²/h | 20m²/h | |
| 6 pass | 7m²/h | 8m²/h | 8m²/h | 7.5m²/h | 15m²/h | |
| Item Model | PL-1850A | |||||
| 1800mm | ||||||
| Printhead |
XP600 |
DX7 |
DX5 | i1600A1/E1 | i3200A1/E1 | |
| 3 pass | - | - | - | 15m²/h | 30m²/h | |
| 4 pass | 10m²/h | 12m²/h | 12m²/h | 10m²/h | 20m²/h | |
| 6 pass | 7m²/h | 8m²/h | 8m²/h | 7.5m²/h | 15m²/h | |
| 75kg | ||||||
| UNEQUIPPED | ||||||
| MaintopV5.3,Photoprint,Seeget,Torpaz,Wasatch,Onyx | ||||||
| AC 110V±10%, AC220V±10%, 50/60±1Hz | ||||||
| Temperature: 20°C~35°C; Humidity: 35%RH~65%RH | ||||||
| 600W | ||||||
| 2837*455*1300mm | ||||||
| 2870*820*500mm | ||||||
| 125kg | ||||||
| 185kg | ||||||
 |
|
| Mainboard | |
 |
 |
| Senyang Mainboard | Hoson Mainboard,Better printing speed, printing color, and operational performance |
| Temperature Control | |
 |
 |
| No temperature control, only fixed temperature | Temperature control, capable of self regulating temperature |
| Media Take-up Device | |
 |
 |
| 24V Low-speed Device | 220V Single Motor Device, Adjustable winding speed and increased winding power |
| Drying System | |
 |
 |
| 150W Fan Drying | 3000W infrared thermal drying+fan drying, easier to dry when printing at high speeds |
| Driver Motor | |
 |
 |
| Stepper Drive Motor | Servo motor, faster speed |
| Main Ink Tank | |
 |
 |
| Low ink cartridge storage capacity and unstable ink supply | Continuous supply system increases ink storage capacity and ink pressure, making it less likely for ink to run out during printing |
| Power Supply | |
 |
 |
| Split type power supply | Integrated power supply, more stable power control, convenient maintenance |
Install the tripod:
Component Names:
1.Main Body
2.Paper Feeding System
3.Dryer
4.Iron Legs
5.Crossbeam
6.Support Fixing Plate
7.Leg Frame
8.Paper Collecting System
Leg Frame Installation:
1. Install the left and right base feet at the bottom ends of the left and right iron legs, and secure them using 8 inner hex bolts (M5×10). Attach the casters with brakes to the left and right base feet using 16 inner hex bolts (M5×10).
Note: Tighten in the direction of the arrow, as shown in the diagram.
2. Install the tie rods and crossbeam between them and secure with 22 inner hex bolts (M5×10), as shown in the diagram.
Application:
For all the outdoor advertising prints on light box,bill board,high way,vehicle,buildings.
