อย่าลืมใช้คะแนนเว็บไซต์ที่สะสมไว้นะคะ คะแนนจะหมดอายุการใช้งานแล้ว
Unit cost
THB 71.61
/set
Wholesale discounts
Quantity
Discount
Price per unit
1
0%
THB 71.61
2-3
7%
THB 66.61
4+
12%
THB 63.02
Total Cost
THB 71.61
Amount
/set
1
3528 5050 Light Strip
Pulse Width Modulation)
2. LIGHT
5/7 SPEED +/-
10/11 BRIGHT +/-
2. LED Output
RF Wireless Controller Mini Dimmer For LED Single Color 3528 5050 Light Strip
Features:
• 8 Dynamic Effects;
• 10 Levels of Dimming Function;
• 256 Grades of Precise PWM;
• Adjustable Speeds for Dynamic Effects;
• Ultrathin RF Wireless Remote Control;
• Ultrathin RF Wireless Control;
• Exquisite Tiny Device;
• Soft Dimming Effects;
• The Main Controller coupling with Remote Control;
• Auto Memorization from Powering Off.
1. Power On / Standby
Press it to switch Power On and Standby mode. When re-plugging power source, the device defaults to Power On and retrieves the working mode before the last shutting down.
2. LIGHT
Pressing it under Dynamic Mode, the device will switch into illumination function,
3/8/9. Brightness Shortcut Keys (100%/50%/25%)
Pressing these buttons, it switches to brightness levels, respectively, 100%, 50% and 25%.
4/6. Adjustment of Dynamic Mode (MODE+/-)
Pressing these buttons under Illumination Mode, the device will switch to Dynamic Mode and pressing them under Dynamic Mode, it will cyclically circulate all the dynamic effects.
5/7. SPEED +/-
The speed adjustment of Dynamic Modes. Press SPEED + to increase speed and press SPEED – to decrease.
10/11. BRIGHT +/-
The brightness adjustment. Pressing BRIGHT+ to increase brightness and BRIGHT – to decrease.
Instruction:
1.Power of the Device
The working voltage of this device is 5V~24V. The power connection cables are red for positive and black for negative. Please choose proper power supply according to the requirement of LED voltage and current.
2.LED Output
The output poles of the power connection cables are red for positive and black for negative, and its max. peak output current is 12A for which please drop load when it causes overheating.
ATTENTION:
• Please don’t make short circuit for LED output terminal otherwise it will damage the device!
• Before using the remote controller, please remove the insulator underneath.
• The device uses the technology of Radio Frequency (RF) that possible to penetrate a certain barrier for which no need to aim the remote controller to the main controller.
• In order to assure the effect of remote control, please don’t put the main device into a sealed metal object.
• The remote controller applies the button cell battery CR2025 3V, and please replace with the same model of battery once it is used up.
