SMD2835 12VDC 0.36W 26*06*2.3mm Nonwaterproof LED Module
Remarks of installation and application:
• Don't stick the surface of the light by sharp tools.
• Don't fix this product by sour glass glue or other soured adhesion;don`t operate or store this product in sour environment or the light will be vulcanized and the life span of the product will be reduced.
• Drive this product by 12V DC switch power supply, and the power should be suitable for the quantity of the led modules; do not connect this product to the utility directly, or the product will be burnt up.
• The total power of the led modules in series should be lower than 80% of the power of the driver, or the power supply will be burnt up probably,select the suitable thickness of the connecting cable according to the quantity of modules, and the connecting points should be wrapped by electrical tape.
• The maximum cascade quantity of this product is 20 pieces for one strip, and the brightness of the two ends will be different because of the voltage loss when you increase the quantity of the module.
|
|
LMT-2-2835-2405
|
|
|
DC 12V
|
|
|
----
|
|
|
30 mA
|
|
|
|
|
|
0.36 W
|
|
|
|
|
|
|
|
|
gray line is positive,white line is negative
|
|
|
16-36 LM
|
|
|
|
|
|
26*6*2 mm
|
|
|
----
|
|
|
|
|
|
|
|
|
|
|
|
- 40~60 °C
|
|
|
IP20
|
|
|
- 60~80 °C
|
|
|
----
|



