С Китайским Новым годом!
Наш офис будет закрыт с 1 по 8 февраля и снова откроется 9 февраля.
General Purpose Carbide 4 Flute Ball Nose End Mill TiSiN Coating
DPB4-01
Цена за единицу
THB 565,00
/pc
Оптовые скидки
Количество
Скидка
Цена за единицу
1
0%
THB 565,00
Опции
กรุณาเลือกประเภท กรุณาเลือกประเภท
Итого
THB 565,00
Количество
/pc
1
General Purpose Carbide 4 Flute Ball Nose End Mill TiSiN Coating
Ball Nose End Mills are mainly used for surface profiling and contouring. It is suitable for high and medium speed processing of alloy steel, die steel and pre hardened steel below HRC50 degrees.
Material: Cemented Carbide(Tungsten Steel)
Coating: TiSiN
Remark: Please Choose the Model when ordering.
| Model | CED(mm) | CEL(mm) | SHK(mm) | OVL(mm) |
| DPB4-01 | 1.0/0.5 | 2 | 4 | 50 |
| DPB4-015 | 1.5/0.75 | 3 | 4 | 50 |
| DPB4-02 | 2.0/1.0 | 4 | 4 | 50 |
| DPB4-025 | 2.5/1.25 | 5 | 4 | 50 |
| DPB4-03 | 3.0/1.5 | 6 | 4 | 50 |
| DPB4-04 | 4.0/2.0 | 8 | 4 | 50 |
| DPB4-04A | 4.0/2.0 | 8 | 4 | 75 |
| DPB4-04B | 4.0/2.0 | 8 | 4 | 100 |
| DPB4-05T | 5.0/2.5 | 10 | 5 | 50 |
| DPB4-05 | 5.0/2.5 | 10 | 6 | 50 |
| DPB4-06 | 6.0/3.0 | 12 | 6 | 50 |
| DPB4-06A | 6.0/3.0 | 12 | 6 | 75 |
| DPB4-06B | 6.0/3.0 | 12 | 6 | 100 |
| DPB4-06C | 6.0/3.0 | 12 | 6 | 150 |
| DPB4-08 | 8.0/4.0 | 16 | 8 | 60 |
| DPB4-08A | 8.0/4.0 | 16 | 8 | 75 |
| DPB4-08B | 8.0/4.0 | 16 | 8 | 100 |
| DPB4-08C | 8.0/4.0 | 16 | 8 | 150 |
| DPB4-10 | 10.0/5.0 | 20 | 10 | 75 |
| DPB4-10B | 10.0/5.0 | 20 | 10 | 100 |
| DPB4-10C | 10.0/5.0 | 20 | 10 | 150 |
| DPB4-12 | 12.0/6.0 | 24 | 12 | 75 |
| DPB4-12B | 12.0/6.0 | 24 | 12 | 100 |
| DPB4-12C | 12.0/6.0 | 24 | 12 | 150 |
| DPB4-14 | 14.0/7.0 | 28 | 14 | 100 |
| DPB4-14C | 14.0/7.0 | 28 | 14 | 150 |
| DPB4-16 | 16.0/8.0 | 32 | 16 | 100 |
| DPB4-16C | 16.0/8.0 | 32 | 16 | 150 |
| DPB4-18 | 18.0/9.0 | 36 | 18 | 100 |
| DPB4-18C | 18.0/9.0 | 36 | 18 | 150 |
| DPB4-20 | 20.0/10.0 | 40 | 20 | 100 |
| DPB4-20C | 20.0/10.0 | 40 | 20 | 150 |