สุขสันต์วันตรุษจีน!
สำนักงานของเราจะปิดทำการในวันที่ 1–8 กุมภาพันธ์ และจะกลับมาเปิดอีกครั้งในวันที่ 9 กุมภาพันธ์
24pcs/pack P-3000A Polymeric adhesive for signage
White
ราคาต่อชิ้น
THB 238.00
/pc
ส่วนลดขายส่ง
จำนวน
ส่วนลด
ราคาต่อหน่วย
1
0%
THB 238.00
ตัวเลือก
กรุณาเลือกประเภท กรุณาเลือกประเภท
ค่าใช้จ่ายรวม
THB 238.00
จำนวน
/pc
1
Features
1. Waterproof and moisture-proof;
2. Polymer nanotechnology;
3. Anti-aging
Durable paste, resistant to aging, chalking, weathering and thermal cycling, without hardening, shrinking or cracking;
4. No fear of high and low temperature difference
No fear of extreme temperature difference environment test, can withstand heat and cold.
Lowest temperature resistance:-50℃
In severe cold conditions, no degumming or cracking
Maximum temperature resistance:200°C
In high temperature environment, it will not melt or corrode.
Specifications
Model: P-3000A
Package: 24pcs/pack
Glue color: black,white,transparent,Grey
Product Name: Logo Engineering Polymer Adhesive
Adhesive strength:80%
Operating time:4-7 minutes
Product specification: 300ml
Clamping time: surface dry 25-35 minutes, fully dry 36-48 hours
Storage conditions: store at room temperature and avoid light
Shelf life: The shelf life of unopened products is 12 months
Application range: signage structure installation, signboard luminous liner bonding, card body sealing, acrylic signboard,
Metal three-dimensional characters installation background wall, shop signboard
Note: The lower the temperature, the slower the positioning time will be
Instructions
1. Cut off the unthreaded part of the head
2. Cut the nozzle obliquely according to the needs
3. Insert the glue gun and tighten the glue nozzle
4. Adjust the glue gun and start sizing
Precautions
1. Please ensure that the surface of the bonded object is clean and dry without any dirt, such as: pigment, oil stains, lubricating oil and rust.
2. Take the product out of the refrigerated environment and use it before the glue arrives. The best use temperature should be between 18-32 degrees.
3. After the operation is completed, the unused glue should be tightened immediately and sealed for storage. When using it again, if there is a little crust on the seal, just remove it, and it will not affect the normal use.
4. Avoid contact with eyes, skin and clothing. After contact with the skin, please wash it with soapy water immediately. If it accidentally splashes into the eyes, please rinse it with plenty of water immediately. If you feel seriously uncomfortable, you must go to the hospital for examination.
5. If you need to use a dispensing machine to apply glue, it is recommended to soak the dispensing needle in a container containing silicone oil when the operation is over or interrupted to prevent the needle from freezing, and take out a small amount of glue in the needle when working again.
