¡Feliz Año Nuevo Chino!
Nuestra oficina estará cerrada del 1 al 8 de febrero y reabrirá el 9 de febrero.
General Purpose Carbide 2 Flute Ball Nose End Mill TiSiN Coating
DPB2-01
Precio unitario
THB 565,00
/pc
Descuentos por volumen
Cantidad
Descuento
Precio por unidad
1
0%
THB 565,00
Opciones
กรุณาเลือกประเภท กรุณาเลือกประเภท
Costo total
THB 565,00
Cantidad
/pc
1
General Purpose Carbide 2 Flute Ball Nose End Mill TiSiN Coating
Ball Nose End Mills are mainly used for surface profiling and contouring. It is suitable for high and medium speed processing of alloy steel, die steel and pre hardened steel below HRC50 degrees.
Material: Cemented Carbide(Tungsten Steel)
Coating: TiSiN
Remark: Please Choose the Model when ordering.
| Model | CED(mm) | CEL(mm) | SHK(mm) | OVL(mm) |
| DPB2-01 | 1.0/0.5 | 2 | 4 | 50 |
| DPB2-015 | 1.5/0.75 | 3 | 4 | 50 |
| DPB2-02 | 2.0/1.0 | 4 | 4 | 50 |
| DPB2-025 | 2.5/1.25 | 5 | 4 | 50 |
| DPB2-03 | 3.0/1.5 | 6 | 4 | 50 |
| DPB2-04 | 4.0/2.0 | 8 | 4 | 50 |
| DPB2-04A | 4.0/2.0 | 8 | 4 | 75 |
| DPB2-04B | 4.0/2.0 | 8 | 4 | 100 |
| DPB2-05T | 5.0/2.5 | 10 | 5 | 50 |
| DPB2-05 | 5.0/2.5 | 10 | 6 | 50 |
| DPB2-06 | 6.0/3.0 | 12 | 6 | 50 |
| DPB2-06A | 6.0/3.0 | 12 | 6 | 75 |
| DPB2-06B | 6.0/3.0 | 12 | 6 | 100 |
| DPB2-06C | 6.0/3.0 | 12 | 6 | 150 |
| DPB2-08 | 8.0/4.0 | 16 | 8 | 60 |
| DPB2-08A | 8.0/4.0 | 16 | 8 | 75 |
| DPB2-08B | 8.0/4.0 | 16 | 8 | 100 |
| DPB2-08C | 8.0/4.0 | 16 | 8 | 150 |
| DPB2-10 | 10.0/5.0 | 20 | 10 | 75 |
| DPB2-10B | 10.0/5.0 | 20 | 10 | 100 |
| DPB2-10C | 10.0/5.0 | 20 | 10 | 150 |
| DPB2-12 | 12.0/6.0 | 24 | 12 | 75 |
| DPB2-12B | 12.0/6.0 | 24 | 12 | 100 |
| DPB2-12C | 12.0/6.0 | 24 | 12 | 150 |
| DPB2-14 | 14.0/7.0 | 28 | 14 | 100 |
| DPB2-14C | 14.0/7.0 | 28 | 14 | 150 |
| DPB2-16 | 16.0/8.0 | 32 | 16 | 100 |
| DPB2-16C | 16.0/8.0 | 32 | 16 | 150 |
| DPB2-18 | 18.0/9.0 | 36 | 18 | 100 |
| DPB2-18C | 18.0/9.0 | 36 | 18 | 150 |
| DPB2-20 | 20.0/10.0 | 40 | 20 | 100 |
| DPB2-20C | 20.0/10.0 | 40 | 20 | 150 |